An Air inflatable machine is an invaluable tool for efficiently and rapidly inflating a wide range of objects. With its powerful air pressure and various nozzle attachments, it can quickly fill air mattresses, inflatable toys, and other inflatable items. The machine's high-speed inflation capability ensures that items are ready for use in a matter of minutes, saving time and effort compared to manual inflation methods.
Below are the advantages of the air inflatable machine for air bubble film series:
1. It can be used on the workbench. According to different shape of the films, different air cushion films can be made. Light and complete functions make you satisfied.
2. Compared with other cushion packaging, the air cushion film can save a lot of storage space and cost
3. The machine weighs only normally ranges from 7kg-10kg. Such a small machine can be placed on any workbench or fixed on the wall, saving more space.
4. No external air supply is required.
5. The built-in small air pump can make the inflation volume of the air cushion reach 90%, and the noise is extremely low.
6. Different air cushion films can be produced to meet different needs
7. Easy to operate, it only takes a few seconds to replace the cushion film
With the availability of compact and portable air inflatable machines, inflating objects while on the go has never been easier. Handheld models powered by batteries or rechargeable batteries provide the ultimate convenience for camping trips, beach outings, or any situation where access to power outlets may be limited. These portable machines allow for hassle-free inflation of air mattresses, inflatable kayaks, and other travel essentials wherever you are.
The air inflatable machine is simple designed, everyone can operate it easily. Take the air inflatable machine for air bubble film as an example.:
Step 1: Power on:
a. Connect the power plug to the single-phase three wire socket with grounding protection;
b.Turn on the power switch1;
Step 2、 Put the roll on the machine
Put the roll on the discharge shaft, keep the air inlet close to the machine. Pull the film, let the film get through the guide stick.
Step 3: Air duct
Let the air nozzle enter the air duct
Step 4: Let the film go through the machine
One hand press the “IN” button, one hand pull the film forward, do these 2 actions at the same time. Stop until the film gets through the belt cover.
Step 5: Setting
Set the correct parameter of the air and temperature, and then start the machine.