Air cushion machine are revolutionizing packaging operations by providing enhanced protection for products during shipping and handling. These innovative machines generate air-filled cushions from air cushion film, creating a cushioning barrier that absorbs shocks and impacts. This advanced packaging solution ensures that delicate items, such as electronics or glassware, reach their destination intact and in optimal condition.
Air cushion machine streamline packaging processes by offering on-demand cushioning solutions. With the ability to produce air cushions as needed, businesses can eliminate the storage and logistics challenges associated with pre-inflated cushion materials. This efficiency not only saves space but also improves operational flow, allowing for faster packaging and reduced handling time.
Below are advantages of the air cushion machine for air bubble film series:
1. It can be used on the workbench. According to different shape of the films, different air cushion films can be made. Light and complete functions make you satisfied.
2. Compared with other cushion packaging, the air cushion film can save a lot of storage space and cost
3. The machine weighs only normally ranges from 7kg-10kg. Such a small machine can be placed on any workbench or fixed on the wall, saving more space.
4. No external air supply is required.
5. The built-in small air pump can make the inflation volume of the air cushion reach 90%, and the noise is extremely low.
6. Different air cushion films can be produced to meet different needs
7. Easy to operate, it only takes a few seconds to replace the cushion film
The air cushion machine is simple designed, everyone can operate it easily. Take the air cushion machine for air bubble film as an example.:
Step 1: Power on:
a. Connect the power plug to the single-phase three wire socket with grounding protection;
b. Turn on the power switch1;
Step 2、 Put the roll on the machine
Put the roll on the discharge shaft, keep the air inlet close to the machine. Pull the film, let the film get through the guide stick.
Step 3: Air duct
Let the air nozzle enter the air duct
Step 4:, Let the film go through the machine
One hand press the “IN” button, one hand pull the film forward, do these 2 action at the same time. Stop until the film gets through the belt cover.
Step 5: Setting
Set the correct parameter of the air and temperature, and then start the machine.